How can the uncoiling leveling line reduce the failure

2020-08-11

　　Uncoiling leveling lineIt is inevitable that there will be operation failure during operation. We cannot avoid the failure of uncoiling line, but we can effectively reduce the number of failures of uncoiling leveling line. Next, we will explain the four-step operation to keep the uncoiling line as far away from the trouble of failure as possible.

1. In the loading operation of uncoiling leveling line, a special person shall be assigned to cooperate with the forklift driver to make the steel coil data fundamentally consistent with the middle of the expansion and contraction drum shaft, and then the forklift driver gradually puts the steel coil data on the trolley.

2. The operator should raise or lower (hydraulic jack), adjust the steel coil data to the middle of the expansion and contraction drum shaft (I .e. the data can enter the expansion and contraction shaft), and adjust the movable bearing seat at the top of the uncoiler at the moment to keep it on the same level as the uncoiler.

　　3、Uncoiling leveling lineAdjust the expansion nut to make the four arch-shaped plates and expand the steel coil data to prevent deformation and damage of the steel coil data during operation.

4, when the steel coil data swell tight in the future, hand change uncoiling line, investigate whether the data can change freely, to prevent all kinds of dangers in the operation.

The uncoiling leveling line is used in the automatic processing of thicker materials. The machine adopts a new pneumatic buffer to make a sensation of fast feeding. Dingji Heavy Industry's uncoiling line is mainly used for cold rolling, suitable for vehicle manufacturing, household appliances, switch cabinets, steel structure office supplies, stainless steel kitchen supplies, machine manufacturing and other occupations. Wear resistance, simple operation, high stability, accurate feeding precision stamping data can be on both sides of the upper and lower thin uniform to the oil, can improve the life of the mold.

　　1、Uncoiling leveling lineLarge cylinder shall be selected for material pressing, and synchronous worm gear and worm shall be selected for correction and adjustment. Handle roll a circle, correct the upper wheel only drop 1cm can do fine adjustment

Dingji Heavy Industry Unwinding Line Loading and Delivery

2. Uncoiling leveling line with high rigidity mechanical structure and high horsepower output. Can be used for high-speed and stable feeding, the progress of the production power, extend the use of equipment. The oil barrel is filtered by a filter screen, which can be used to filter and recover the used punched oil for re-use, so as to achieve the function of saving fuel.

3. The correction wheel uses solid bearing steel. After high-frequency heat treatment, it is ground and hard chrome plated. After correction by this machine, it is smooth and smooth without indentation, and does not damage the surface of the data.

4. The uncoiling leveling line can be used alone, and at the same time, it can be used in cooperation with MT type and MTD type automatic feeding frame at the same time, which has outstanding effect.

With the continuous development of science and technology,Uncoiling leveling lineThe scope of application is also getting wider and wider. The uncoiling leveling line is used to uncoiling, leveling and palletizing coils of different specifications into coils of required fixed width for various plate requirements.Uncoiling leveling lineThe production line has reasonable layout, convenient operation, high degree of initiative, high production efficiency and high working precision. It can process all kinds of cold-rolled and hot-rolled coils, silicon steel plates, stainless steel plates, color plates, aluminum plates and all kinds of metal plates after electroplating or coating.