Operation Precautions for the Operation of the Uncoiling Line

2020-08-10

In recent years, industrial production safety accidents continue to occur, which makes us once again sounded the safety alarm. No matter what the manufacturing industry is doing, safety must be put first in the manufacturing industry. as aUncoiling leveling lineManufacturer, we must ensure safe and reasonable operation under the operating conditions of the uncoiling leveling line. Here, explain the four main operational problems after the start of the uncoiling leveling line.

　　1.Uncoiling leveling lineThe main use of coil decision processing technology. All products are made of heat insulation layer, fabric, main material, composite type and double pressure. Mechanical equipment automation technology is easy to operate without any inconvenience. According to customer expectations, we can produce products with different specifications and models, different raw materials, smooth surface and high density, which changes the punching construction technology of wall insulation in engineering projects.

2. Pay attention to whether there is salt butter in the local area of the uncoiling leveling line, and add salt-free butter once a month, mainly for the lubricated rolling bearings.

3. In the expansionUncoiling leveling lineIt is not an optional positive/negative schedule for the operation. When first interrupting and then emergency shutdown, and then selecting forward/reverse and material management, it should be noted that the raw material of the printing paper should not be touching the line. After cutting off the ten thousand lines, the application time is long. Check whether the nut is loose. If necessary, loosen the wrench and tighten. If you encounter professional and technical problems, please ask professional and technical personnel to solve them.

4. Pay attention to clean the surface of the uncoiling leveling roller. Welding penetration is not allowed. Wood boards or other objects fall into the hot strip steel to prevent damage to the flat roll. Cold drawn steel is a common type of steel. It is inevitable that under the indoor temperature, under the standard of uncoiling the flat strip and a set of vertical hot-rolled strip steel, the total width will gradually deform to meet the required size. Then, the fracture limit of the relative length is determined. Of course, cold-formed steel can also be obtained by stamping dies, collision or deep drawing deformation methods. As we all know, the roll bending method is suitable for industrial production, and its product quality, production cost, output power and other methods are unparalleled. It is the main production and processing technology of cold-formed steel at this stage, and it is also the technical premise of foreign countries. It has fully completed the production of complete sets of automation technology and equipment in China.

These four operations are inUncoiling leveling lineThe whole process of operation is more critical, and it is also an area where safety accidents occur frequently. Don't care too much at any time. After all, safety can be regarded as a huge economic benefit in manufacturing, and safety incidents are undoubtedly expensive product costs.