Blog
—
Yellowstone bending machine: the main factors to consider when buying bending machine
2020-11-18
The purchase of goods is also a very important stage. As a common production equipment, Huangshi bending machine is naturally the same. Once the selection is not good, not only the quality of the goods but also the cost of the products will be affected. In order to better avoid the cost of Yellowstone bending machine can be recovered normally, the following elements should be paid attention.
The elements to be taken into account are the production and processing objectives, as well as the parts to be produced and manufactured. Under the premise of considering the production and processing regulations, short and small equipment should be selected to reduce the cost of capital investment. In addition, the characteristics of raw materials are also required to ensure that the actual effect of sheet metal bending can be optimized.
According to statistics, the length of the parts is very important for clarifying the specifications and models of the Huangshi bending machine, and it is effective for reducing the purchase cost. In addition, compared with high carbon steel, the load of stainless steel plate will generally increase by half, which can also show a certain basis for purchasing Huangshi bending machine. From the table of Huangshi bending machine, we can clearly see its matching level with work.
The method of Huangshi bending machine is not only the installation of packaging machinery and equipment itself, but also the installation and adjustment of spare parts. In terms of adjusting this work, because there are many contents involved, it is still up to Huangshi bending machine technicians to give us a detailed explanation of the efficacy.
Before adjustment, it is necessary to have a sufficient grasp of the characteristics and functions of machinery and equipment, and to carry out after inspection. The target to be adjusted is the guide rail slider of Huangshi bending machine, but it is necessary to ensure that the thickness of the die shell and the proportion of the left and right control modules are actually operated under normal conditions. Generally, the guide rail slider is operated at the power switch point of the stroke arrangement route to prevent the die shell from being used normally.
After adjusting to the guide rail slider, the control module of Huangshi bending machine should also be adjusted. The general condition control module goes up to the high altitude, which is convenient for improving the actual effect of production and manufacturing. In the whole process here, it is also necessary to carry out mitigation and resolution of the control module to maintain that the machinery, equipment and die shell will not be damaged. The important thing is actually the angle of view adjustment, which takes into account the goal of sheet metal bending.
2020
/
11-18
Classification:
Industry Information
RELATED INFORMATION
Welcome to inquire
+86-714-6355458
Contact E-mail: sales@ysd-hd.com
Address: No. 158 Jinshan Avenue, Economic Development Zone, Huangshi City, Hubei Province
Copyright © Hubei Tri-Ring Metalforming Equipment Co.,Ltd
This website supports IPV4 / IPV6 bidirectional access