Introduce the operation essentials of high-speed shearing machine

2021-04-25

High speed shearing machine operation essentials:

1, are not allowed to shear laminated sheet, are not allowed to trim the edge of the raw edge sheet, are not allowed to shear pressure is not tight narrow sheet and short material.

2. The gap between the knife plates shall be adjusted according to the thickness of the plate, but shall not be greater than 1/30 of the plate. The knife plate shall be fastened and reliable, and the upper and lower knife plate surfaces shall be parallel. Manual turning inspection shall be applied after adjustment to avoid accidents.

3. The cutting edge of the knife plate should be sharp. If the cutting edge becomes blunt or has cracking phenomenon, it should be changed in time.

4. When shearing, the pressing material installation should firmly press the plate, and it is not allowed to stop shearing under the condition of not being pressed tightly.

5. For equipment with hydraulic installation, other hydraulic valves except throttle valve are not allowed to be adjusted without permission.

6, on the hydraulic swing hydraulic guillotine shearing machine blade shear plate thickness, should be based on the "plate limit strength and plate thickness relationship curve graph" to confirm.

Matters needing attention in the use of hydraulic shearing machine

What are the differences between CNC cutting tools and ordinary shearing machines?

2021

04-25

Classification:

Industry Information

RELATED INFORMATION

21 Jul,2026

Strategic synergy strengthens the core business; collaborative growth boosts momentum.

24 Mar,2026

Unite Partners, Strengthen Quality, Usher in a New Journey, and Achieve Another Leap

24 Feb,2026