Operation specification and routine maintenance of pre-bending machine

2020-07-21

1.Pre-bending machineThe characteristics

1. Its structure is simple and compact, and the rigidity of the body is good.

　　2.Pre-bending machineThe mechanical stop can be adjusted at will to meet the requirements of free bending. In addition, the length of the slider can also be controlled.

3. The grinding tool is equipped with a precision compensation mechanism, which can obtain higher bending precision.

4. It is easy to realize automatic operation, and there are some protective devices on the machine to ensure safe operation.

预弯机

2. pre bending machine operation specification:

1. Before using the bending machine, please read its relevant instructions carefully to avoid blind operation and damage to the machine and equipment.

2. If it is operated by multiple people, you must confirm before stepping on the foot switchPre-bending machineThere are no unsafe factors to ensure safety.

3. The gap between the upper and lower dies should be uniform and reasonable, the pressure should be adjusted appropriately, and the bending machine should be kept clean and tidy.

3.Pre-bending machineMaintenance

1. Check the oil level of the fuel tank every week to see if the oil level is too low and whether to supplement hydraulic oil.

2. The oil temperature of the system should be controlled within the range of 35-60. If the temperature is too high, the parts will be damaged.

　　3.Pre-bending machineHydraulic components should be cleaned once a month to prevent dust from entering.

4. Check whether each elbow has abnormal phenomena such as deformation, and replace it immediately if any.

How to improve the body wrapping efficiency of uncoiling leveling line?

None

2020

07-21

Classification:

Industry Information

RELATED INFORMATION