Let's learn about the safety operation procedures of the bending machine

2021-04-22

In the process of bending machine operation, we must pay attention to the safety problems during operation. These safety problems mainly include the safety during operation, the standard behavior of the operator during operation, and the inspection before and after each operation. Only by paying attention to the main points of these aspects can the operation of the whole machine become more secure.

safety operation procedures of bending machine:

1. It is strictly forbidden to overload the bending machine, and hardened steel, hard steel, high-speed steel, alloy steel, castings and non-metallic materials shall not be bent.
2. The cutting edge of the curved production model should be kept smooth, dull or damaged, and should be polished or adjusted in time.
When two or more people are required to operate at the same time, all participants must communicate with each other and cooperate closely.
4. It is forbidden to bend two different specifications of materials at the same time on the bending machine, and overlapping bending is not allowed. Before automatic operation, verify that all switches and moving parts are in the correct position.
Do not attempt to use the new program until you have checked its operation. After confirming that the program has no errors, the workpiece is machined in single-stage mode. If there is no invention problem, automatic operation can be started.
6. When bending and feeding, it is forbidden to operate under the pressure plate. When bending the short material, use another auxiliary tool to press. When bending, the finger is at least 100mm from the cutting edge of the production model.