Use and Maintenance of Turret Punch

2020-08-22

CNCTurret punch pressThe correct use and maintenance of the mold should pay attention to the following points:

1. Before installing and using the mold, the turret punch should strictly check the mold to remove dirt, and check whether the guide sleeve and mold of the CNC turret punch mold are well lubricated.

2. Regularly check the turntable and mold mounting seat of the press to ensure the coaxial accuracy of the upper and lower turntables.

　　3.Turret punch pressThe convex and concave molds should be installed on the turntable according to the mold installation steps to ensure that the directions of the convex and concave molds are consistent, especially for molds with direction requirements (non-circular and square) to prevent incorrect or reverse installation.

4. After the turret punch die is installed, check whether the fastening screws of the die mount are locked correctly.

5. When the punch of the die and the edge of the die are worn, please stop using it and sharpen it in time, otherwise it will rapidly expand the wear of the die edge, accelerate the wear of the die, and reduce the quality and life of the die. Death.

　　6.Turret punch pressMass production of general mold should be spare, to take turns to produce and ensure production needs.

7. Stampers should use softer metals (such as copper, aluminum, etc.) to make operating tools to prevent damage to the mold during installation.

8. The mold should be handled carefully during the transportation of the turret punch press, and no litter should be thrown to avoid damage to the blade and guide rail of the mold.

9. After using the mold, put it back to the designated position in time, and carry out oil-proof and rust-proof treatment.

　　10.Turret punch pressIn order to ensure the service life of the mold, the spring of the mold should be replaced regularly to prevent the fatigue damage of the spring from affecting the use of the mold.