News

Latest developments

—

Latest developments

Industry Information

Video Center

Matters needing attention in the use of hydraulic shearing machine

Matters needing attention in the use of hydraulic shearing machine

Matters needing attention in the use of hydraulic plate shearing machine: the plate shearing machine idling for a number of cycles, to ensure that under normal circumstances, try to cut different thickness of sheet metal, from thin to thick. Make sure the user is familiar with the shears performance.

Apr 25,2021

View Details
Introduce the operation essentials of high-speed shearing machine

Introduce the operation essentials of high-speed shearing machine

The operation essentials of high-speed plate shearing machine: 1. It is not allowed to shear laminated plates. Wuxi Shenchong believes that it is not allowed to trim the edges of raw edge plates, and it is not allowed to shear narrow plates and short plates that are not tightly pressed. 2. The gap between the knife plates shall be adjusted according to the thickness of the plate, but shall not be greater than 1/30 of the plate. The knife plate shall be fastened and reliable, and the upper and lower knife plate surfaces shall be parallel. Manual turning inspection shall be applied after adjustment to avoid accidents.

Apr 25,2021

View Details
What are the differences between CNC cutting tools and ordinary shearing machines?

What are the differences between CNC cutting tools and ordinary shearing machines?

In order to stably process the surface of high-precision parts, more stringent requirements are put forward for the manufacture of tools (including tool parts) in terms of precision, surface roughness, form and position tolerance, etc. than ordinary tools, especially indexable tools. In order to ensure the repeat accuracy of the blade tip (cutting edge) after indexation, the size, accuracy and surface roughness of key parts such as the tool body groove and positioning parts must be strictly guaranteed, at the same time, in order to facilitate the tool in the tool set and size measurement, the base surface machining accuracy should also be guaranteed.

Apr 25,2021

View Details
Can the blade in the CNC shearing machine be turned up and down?

Can the blade in the CNC shearing machine be turned up and down?

CNC shearing machine, which is a mechanical equipment, is mainly used for shearing work. And this equipment, there are different specifications and types. Therefore, we may wish to be familiar with and understand from its whole, so that we can also have an overall understanding of the shearing machine in order to be familiar with its specific types.

Apr 25,2021

View Details
Do you understand the electrical control system of the hydraulic shearing machine?

Do you understand the electrical control system of the hydraulic shearing machine?

The electrical control system of the hydraulic shearing machine is the main component of the machine equipment. Each shearing machine has a stable and reliable electrical control system. The following is a brief introduction to the electrical control system of the hydraulic shearing machine.

Apr 25,2021

View Details
< 1...91011...41 >