Hydraulic bending machine can meet the needs of various workpieces

2021-04-25

The hydraulic bending machine includes a bracket, a worktable and a clamping plate. The worktable is placed on the bracket. The worktable is composed of a base and a pressing plate. The base is connected with the clamping plate through a hinge. The base is composed of a seat shell, a coil and a cover plate. The coil is placed in the depression of the seat shell, and the top of the depression is covered with a cover plate. When in use, the coil is energized by the wire, and the pressure plate is energized to generate attractive force, so as to realize the clamping of the thin plate between the pressure plate and the base. Due to the use of electromagnetic force clamping, so that the pressure plate can be made into a variety of workpiece requirements, but also the side wall of the workpiece processing. The bending machine can meet the needs of various workpieces by replacing the bending machine mold.

hydraulic bending machine advantages:

1, based on the principle of hydraulic transmission, the implementation of components (cylinder and plunger or piston) structure is simple, the structure is easy to complete a large task pressure, a larger task space and a longer task stroke, so compliance is strong, easy to suppress large workpieces or longer and higher workpieces.

Any position of the external stroke can cause additional maximum pressure of the press. It is possible to maintain the pressure for a long time at the lower conversion point, which is very demanding for many processes.

3. The total stroke of the slider can be arbitrarily changed within a certain range, and the lower conversion point of the slider stroke can be controlled or changed according to the pressure or stroke position.

4, the slider rate can be in the positive category connotation of the level of the implementation of the conditioning, which can comply with the process of the slider rate of the difference requirements. When the pump is used for indirect transmission, the adjustment of the slider speed can be related to the pressure and stroke.

5. Compared with forging hammer, the task is single-stable, with less impact, vibration and noise, which is of great benefit to workers' Ankang, factory building foundation, weekly R4 situation and configuration itself.

6, can use a simple method in a task cycle pressure adjustment or pressure limit, not easy to overload, easy to maintain all kinds of mold.

None

The advantage of CNC bending machine

2021

04-25

Classification:

Industry Information

RELATED INFORMATION

20 Feb,2024

Everyone acts as quality inspector and seeks high-quality development -- Tri-Ring's Metalforming2023-Year Quality Month Successfully Concluded

18 Feb,2024

Full of passion to welcome the year of the dragon, go all out to start a new journey, Tri-Ring the first day of Metalforming construction.